Heavy Lifting · Since 1874

Potain Cranes, Parts, and Power: A Scenario-Based Procurement Guide

2026-11-13 · Bogdan Ionescu · Field Engineering

I manage procurement for a construction company. That means I buy everything from safety gloves to Potain crane rentals—about 70–80 orders a year across 8 vendors. I report to both operations and finance, which means I get yelled at from two directions when something goes wrong.

Here's the thing about sourcing a tower crane: it's never one decision. It's a pile of them. The right answer depends on project length, site conditions, your rental partner's parts network, and whether your temporary power setup can handle the load. Somewhere between a breaker box spec and a Westinghouse generator quote last month, I also managed to Google "crane vs heron" by accident. I was trying to find bird deterrents for the site office roof. Search results were not helpful.

After five years of this, I've stopped looking for a universal recommendation. There isn't one. What I do instead is sort the situation into one of three buckets and work from there. Here's how that looks.

Scenario A: Long-term project (12+ months)

Big project, big crane. You're looking at a Potain MDT or MCT top-slewing unit. Probably a lease or a long-term rental.

In this scenario, the daily rate is the least important number on the page.

What matters more: parts lead time. I learned this in 2022 when we went with a regional rental supplier who was 12% cheaper than our usual guy. Three months in, the slew drive failed. They didn't stock the Potain part. Took eight days to source it from out of state. Eight days of a crane sitting dead on site while our project manager called me twice a day.

You can't always avoid equipment failure. You can avoid the situation where a rental partner doesn't know where their Potain parts come from. So I ask upfront now: "Who's your parts supplier, and what's your average lead time on a slew ring?" If they fumble the answer, I move on.

Second thing: temporary power. A tower crane pulls serious amperage—often 400A or more depending on the model. If the site's breaker box isn't spec'd for it, you'll be tripping breakers every shift. I require our electrical contractor to confirm the breaker box rating before the crane shows up. A crane that can't run is just an expensive sculpture.

On a recent project, we also brought in a Westinghouse generator as a backup for the crane's dedicated circuit. The site had grid reliability issues. The generator cost less than two days of crane rental. That's the easiest insurance policy I've ever bought.

Quick boundary check: I'm not an electrical engineer. I can tell you how to evaluate a rental contract and what questions to ask your site electrician. For the actual breaker spec and power distribution, get your engineer involved. This gets into technical territory that isn't my wheelhouse.

One more thing—I'd rather spend ten minutes walking an operations manager through rental contract terms than deal with the fallout of a mismatched expectation later. Informed people make faster decisions. That saves me time in the long run.

Scenario B: Mid-size project (4–12 months)

This is where I'd push toward a self-erecting crane—a Potain Igo or an MCT model that goes up fast and comes down faster.

Counterintuitive take: the crane with the lower monthly rate is often the more expensive choice.

Why? Setup and teardown. A top-slewing crane takes longer to erect and dismantle. If your project is six months, and you're paying for a week of erection and a week of takedown on a bigger crane, the line items add up. On our last mid-size job, every spreadsheet said go with the larger crane—lower rental rate, higher capacity. My gut said the logistics would eat the savings. I chose the bigger crane anyway.

We lost three days because the access road was too narrow for the assist crane. My gut was right. I still kick myself for not pushing harder on the self-erecting option. Three days of lost crane time, plus the site crew's idle hours, ate the entire rental savings and then some.

For this scenario, ask your rental dealer:

  • How many truckloads does the machine ship in?
  • Erection time in hours—not "a day or two"
  • Does the contract include an erection supervisor?
  • What's the service record look like on Potain parts replacement?

And if you're renting from a Potain dealer who also handles parts, ask about bundling a parts allowance into the contract. Some will do it. It covers you for small failures without a change order every time.

Scenario C: Short-term need or one-off lift

Under four months? Either hire a contractor who brings their own equipment or rent the smallest machine that gets the job done.

Here's the math nobody puts in the brochure: Potain crane rentals make economic sense when you're renting for months, not weeks. Mobilization costs don't scale down for short jobs. A one-week rental can carry the same setup and teardown cost as a six-week rental. You're paying a premium for the logistics.

My move for short-term needs: call a Potain dealer directly and ask what they have coming off a nearby job. Sometimes they'll cut you a deal on mobilization because the machine is already in the area. I've saved 20–30% that way on short rentals.

For Potain parts in this scenario, don't buy new. Find a dealer who handles refurbished parts. The markup on new parts for a two-week job rarely makes sense. I once bought a new control module for a short-term rental and then watched the rental company swap it out anyway. Waste of $800. That's on me.

There's something satisfying about pulling off a two-week rental without paying for three weeks of mobilization. But that only happens when you call the dealer early and ask the right questions.

How to figure out which scenario you're in

Quick filter:

  • 12+ months: Scenario A. Parts network and power planning matter more than the daily rate.
  • 4–12 months: Scenario B. Run the setup/teardown math before you compare rental quotes.
  • Under 4 months: Scenario C. Compare renting vs hiring a contractor who already owns the crane.
  • Genuinely unsure: Call the Potain dealer, explain your timeline, and ask what they'd do. They've seen your situation before.

Bottom line: if a vendor can't tell you where their Potain parts come from, or fumbles when you ask about lead times, walk away. The savings on the quote aren't worth the downtime.

And if you catch yourself Googling "crane vs heron" at 11pm—relax. I did too. The heron stands in a marsh and eats fish. The crane lifts steel and costs more than my car. Different tools for different jobs. Choose accordingly.